2.3 KiB
Official info
The Wifi devboard ships with Blackmagic firmware installed. The Flipper documentation is here, and Blackmagic is over here.
Quick start: Connect to the SSID blackmagic using the password iamwitcher or plug the wifi devboard in via USB.
Some quick steps to get Marauder installed
(Direct from the dev WillStunForFood on Discord - check out his video walkthrough too!):
- Plug the WiFi dev board directly into your PC
- Upload the MarauderOTA firmware from source via Arduino IDE
- Use the MarauderOTA firmware to flash the Marauder Flipper bin over WiFi
The first step in the wiki documentation starts here.
(Then you should have the necessary links to the follow on documentation to get the firmware installed.)
ESP32-S2 is the correct board if you are installing on the Flipper WiFi Dev Board.
If you are using the Marauder OTA method, you shouldn't have to install any libraries.
The only other thing you should have to install is the boards for the ESP32 in the Arduino IDE and the drivers for the ESP32-S2.
Commands channel, scanap, sniffbeacon, sniffdeauth, sniffpmkid, stopscan, clearap
Quick steps from Rabid Root...
AND a great step by step from E_Surge!
If serial connection looks scrambled... (thanks Frog!)
Frog also noticed that it's wise to reflash firmware if such issues are persisting.
Start with the Official firmware, test, then move to a unlocked one if desired.