mirror of
https://github.com/UberGuidoZ/Flipper.git
synced 2024-12-22 06:20:12 +00:00
101 lines
6.6 KiB
Markdown
101 lines
6.6 KiB
Markdown
# Various SUB files I've found or created. Some tested, some not.
|
|
|
|
Special thanks to [FalsePhilosopher](https://github.com/FalsePhilosopher) for organization help and everyone else that shares files!<br>
|
|
Worth a mention: If you have a HackRF, you can find a ton of files and info over at RocketGod's [HackRF Treasure Chest](https://github.com/RocketGod-git/HackRF-Treasure-Chest).
|
|
|
|
## How are the raw SUB files are formatted? (Adapted from a chat with [ImprovingRigmarole](https://github.com/improving-rigmarole)!)
|
|
|
|
This is a very quick and dirty explanation of the Flipper "raw" SUB format. Enough to figure out more at least.<br>
|
|
Each numerical value is the duration of a pulse in microseconds. Positive is `send` and negative is `pause`.<br>
|
|
Example: `3607 -100 1789 -66` means send (positive) during the `3607µs` then pause (negative) for the `100µs`, etc.<br>
|
|
You can easily plot any raw SUB (or IR) file at the [Official Pulse Plotter](https://my.flipp.dev/pulse-plotter) and see a graph to help decode patterns.
|
|
|
|
Another take... positive numbers in the raw .SUB files tell you how long (in microseconds / μs) the signal was ON and the negative numbers tell you how long it was OFF. Usually on means 1 and off means 0. This also makes sense when you remember/realize OOK = `On Off Keying`.
|
|
|
|
## NOTE: The deBruijn and OpenSesame files have moved to the [Garages subfolder](https://github.com/UberGuidoZ/Flipper/tree/main/Sub-GHz/Garages/deBruijn).
|
|
|
|
You can generate MANY of your own SUBs, such as MegaCode and Firefly, over at [Flipper Maker](https://flippermaker.github.io/).
|
|
|
|
Looking to mess with garage doors? You can try the OpenSesame/deBruijn files above.<br>
|
|
(Also check out more info at [RemoteDup](https://www.ifoedit.com/RemoteDup.html), [GarageHack](https://www.ifoedit.com/garagehack.html), and [Learn Button coding](https://support.dealer.liftmaster.com/articles/Knowledge/Determine-the-Color-of-the-Learn-Button-on-Your-Garage-Door-Opener).
|
|
|
|
# Frequency limitations and caveats
|
|
|
|
Officially supported frequencies: 300-348 MHz, 387-464 MHz, and 779-928 MHz (from [CC1101 chip docs](https://www.ti.com/product/CC1101))<br>
|
|
Unofficially supported frequencies: 281-361 MHz, 378-481 MHz, and 749-962 MHz (from [YARD Stick One](https://greatscottgadgets.com/yardstickone/) CC1111 docs)
|
|
|
|
Official does not allow anything outside of the officially supported CC1101 specs.<br>
|
|
RogueMaster & CodeGrabber (Unleashed) allows unofficially supported frequencies with the `extend_range` and `dangerous_settings` files.
|
|
|
|
**NOTE: Going outside the officially supported frequencies may DAMAGE YOUR FLIPPER AMP.<br>
|
|
Please understand what you're doing if trying to break out of official frequencies.**
|
|
|
|
Here's what the [manufacturer of the chip (CC1101) says](https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1120743/cc1101-operation-outside-datasheet-frequencies/4154832) about going outside the limits:
|
|
|
|
```
|
|
The frequency range of the chip is always tested in the verification tests and there is always some design margin included before
|
|
the VCO and/or PLL has problems operating for a specified frequency range. Working outside the frequency range can cause issues
|
|
with the VCO and/or PLL and/or divider not operating correctly. If the VCO is operating outside it's standard frequency range,
|
|
there are risks of unwanted emissions and no oscillation. The PLL can also fail to lock if operating outside it's standard
|
|
frequency range and will still apply power to the antenna.
|
|
|
|
Risks with antenna mismatch are increased harmonics, reduced output power and increased current consumption. Generally, the antenna
|
|
mismatch can be large and the output stage will not be damaged when presented with a large mismatch for short periods of time.
|
|
However, if the antenna mismatch is very poor for long periods of time, then this can effect the longevity of the chip especially
|
|
if further stressed with maximum voltage and maximum temperature. Recommend keeping VSWR better than 5:1 for worst case scenarios.
|
|
```
|
|
|
|
You'll need to edit some code and recompile if you want to break outside of the officially supported frequencies. [Proceed with caution.](https://github.com/UberGuidoZ/Flipper/blob/main/Sub-GHz/Restaurant_Pagers/SubGHz_changes.md)
|
|
|
|
Officially supported frequencies according to region (as manufactured and programmed on Official firmware):
|
|
|
|
`Allowed to transmit (MHz):`<br>
|
|
`R01: 433.05-434.79; 868.15-868.55`<br>
|
|
`R02: 304.10-321.95; 433.05-434.79; 915.00-928.00`<br>
|
|
`R03: 312.00-315.25; 920.50-923.50`<br>
|
|
|
|
`Shipped to:`<br>
|
|
`R01: EU, UK, RU, UA, BY, BA, PF, VA, IS, KZ, LI, MD, MK, NO, RS, CH, TR`<br>
|
|
`R02: US, CA, AU, NZ, MX, BR, CL, AR, UM`<br>
|
|
`R03: rest of the world`
|
|
|
|
# Modulation (AM/FM)
|
|
|
|
AM650 and FM650 modulation tries to cover more range of frequencies at the cost of less pickup distance.<br>
|
|
AM270 and FM270 modulation offer a more narrow range, but have a cleaner pickup and slightly better distance.
|
|
|
|
[Official documentation is an excellent read!](https://docs.flipperzero.one/sub-ghz/read-raw#HUe8f)
|
|
|
|
evilpete has a script for creating custom modulations amoung various other flipper flipper file format generators/converters
|
|
https://github.com/evilpete/flipper_toolbox
|
|
|
|
# Plotting/analyzing signals
|
|
ShotokanZH has a plotter
|
|
https://github.com/ShotokanZH/flipper_sub_plotters_comparers
|
|
The flipper lab website has one
|
|
https://lab.flipper.net/pulse-plotter
|
|
and a python script by paucoma
|
|
https://gist.github.com/paucoma/57080d2845ba4b21b980b90842c38eb1
|
|
|
|
-----
|
|
|
|
## Donation Information
|
|
|
|
Nothing is ever expected for the hoarding of digital files, creations I have made, or the people I may have helped.
|
|
|
|
## Ordering from Lab401? [USE THIS LINK FOR 5% OFF!](https://lab401.com/r?id=vsmgoc) (Or code `UberGuidoZ` at checkout.)
|
|
|
|
I've had so many asking for me to add this.<br>
|
|
 
|
|
|
|
**BTC**: `3AWgaL3FxquakP15ZVDxr8q8xVTc5Q75dS`<br>
|
|
**BCH**: `17nWCvf2YPMZ3F3H1seX8T149Z9E3BMKXk`<br>
|
|
**ETH**: `0x0f0003fCB0bD9355Ad7B124c30b9F3D860D5E191`<br>
|
|
**LTC**: `M8Ujk52U27bkm1ksiWUyteL8b3rRQVMke2`<br>
|
|
**PayPal**: `uberguidoz@gmail.com`
|
|
|
|
So, here it is. All donations of *any* size are humbly appreciated.<br>
|
|
 
|
|
|
|
Donations will be used for hardware (and maybe caffeine) to further testing!<br>
|
|
 |