neil/Flipper
1
0
Fork 0
mirror of https://github.com/UberGuidoZ/Flipper.git synced 2025-01-21 05:00:56 +00:00
Code Issues Packages Projects Releases Wiki Activity

Update ReadMe.md

Browse Source
This commit is contained in:
UberGuidoZ 2022-08-07 16:05:47 -07:00 committed by GitHub
parent 0e169d5d4e
commit 9677886403
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 17 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
Sub-GHz/ReadMe.md
View File

@ -26,8 +26,25 @@ RogueMaster & CodeGrabber (Unleashed) allows unofficially supported frequencies
**NOTE: Going outside the officially supported frequencies may DAMAGE YOUR FLIPPER AMP.<br>
Please understand what you're doing if trying to break out of official frequencies.**
Here's what the [manufacturer of the chip (CC1101) says](https://e2e.ti.com/support/wireless-connectivity/sub-1-ghz-group/sub-1-ghz/f/sub-1-ghz-forum/1120743/cc1101-operation-outside-datasheet-frequencies/4154832) about going outside the limits:
```
The frequency range of the chip is always tested in the verification tests and there is always some design margin included before
the VCO and/or PLL has problems operating for a specified frequency range. Working outside the frequency range can cause issues
with the VCO and/or PLL and/or divider not operating correctly. If the VCO is operating outside it's standard frequency range,
there are risks of unwanted emissions and no oscillation. The PLL can also fail to lock if operating outside it's standard
frequency range and will still apply power to the antenna.
Risks with antenna mismatch are increased harmonics, reduced output power and increased current consumption. Generally, the antenna
mismatch can be large and the output stage will not be damaged when presented with a large mismatch for short periods of time.
However, if the antenna mismatch is very poor for long periods of time, then this can effect the longevity of the chip especially
if further stressed with maximum voltage and maximum temperature. Recommend keeping VSWR better than 5:1 for worst case scenarios.
```
You'll need to edit some code and recompile if you want to break outside of the officially supported frequencies. [Proceed with caution.](https://github.com/UberGuidoZ/Flipper/blob/main/Sub-GHz/Restaurant_Pagers/SubGHz_changes.md)
Officially supported frequencies according to region (as manufactured and programmed on Official firmware):
`Allowed to transmit (MHz):`<br>
`R01: 433.05-434.79; 868.15-868.55`<br>
`R02: 304.10-321.95; 433.05-434.79; 915.00-928.00`<br>