Bouffalo Labs ISP tool & library

Open source tool and library for flashing Bouffalo RISC-V MCUs.

NOTE: Library API and blisp tool cli arguments are not stable yet.

Supported MCUs

• bl60x - BL602 / BL604
• bl70x - BL702 / BL704 / BL706
• bl606p - BL606P
• bl61x - BL616 / BL618
• bl808 - BL808

Supported Devices

• Pinecil V2

Building

Clone repository

If you have not cloned this repository locally; check out the git repository locally by running

git clone --recursive https://github.com/pine64/blisp.git
cd blisp

Build the library and command line utility

For building blisp command line tool, use following commands:

mkdir build && cd build
cmake -DBLISP_BUILD_CLI=ON ..
cmake --build .

Usage

For BL70X, BL61X, BL808 and BL606P, connected via USB, you can use following command, which will auto-detect serial port:

blisp write --chip bl70x --reset name_of_firmware.bin

For BL60X, you need to specify also the serial port path:

blisp --chip bl60x --reset -p /dev/ttyUSB0 name_of_firmware.bin

Updating Pinecil V2: How to build BLISP Flasher

Note: This has been tested on x86-64. The build process also works on aarch64 and armv7.

Linux Steps

⛔ Do not use the Pinecil DC barrel jack while updating firmware or you may destroy your PC. ⛔

1. Linux set-up

git clone --recursive https://github.com/pine64/blisp.git
cd blisp
mkdir build && cd build
cmake -DBLISP_BUILD_CLI=ON ..
cmake --build .
mkdir tools/blisp/data
mkdir -p tools/blisp/data/bl70x

Note: the blisp command will now be in build/tools/blisp/ folder and could later be run with flags as ./tools/blisp/blisp unless you cd into that folder.

2. Get and cp or mv eflash_loader_32m.bin to bl70x folder

/build/tools/blisp/data/bl70x/eflash_loader_32m.bin

a. Download eflash*32m.bin here. b. Move eflash32m.bin to the build/tools/data/bl70x folder b. Move eflash32m.bin to the folder build/tools/data/bl70x c. If it is a Zip, then unzip & move it.

unzip eflash_loader_32m.zip -d tools/blisp/data/bl70x/

3. Get V2 firmware from Github Ralim's IronOS

   a. Download the newest stable firmware release here.

   b. Or download the Beta firmware IronOS here Scroll to the very bottom of the page and download Pinecilv2. This link is to beta that has BLE and also works for EPR chargers

   d. Extract Pinecilv2.zip and select a single language file (English = Pinecilv2_EN.bin).

   e. Move the Pinecilv2_EN.bin (or selected language) into the same folder as the blisp command.

build/tools/blisp/Pinecilv2_EN.bin

can delete all the rest of the Pinecilv2**.zip as it is not needed.

4. Connect Pinecil to PC/laptop: long hold [-] , then connect cable. Can release the [-] after about 15-20second. V2 screen should be Empty/black, if not, then repeat connection, or find another cable/port. Pinecil connects as a serial COM port.

5. If this fails, see troubleshooting below.

6. If you are in the folder blisp/build/tools/blisp/ then execute

sudo ./blisp write -c bl70x --reset Pinecilv2_EN.bin

Note: if a different language was selected, replace Pinecilv2_**.bin above with the chosen file name.

7. Almost done: unplug from the PC and restart V2. Hold down the minus (-) button to see the new version number.

8. Before making menu changes, it is recommended to first Restore Settings to Default. Simply go to Advanced settings > Restore default settings, confirm using the (+) button. This sets all menu items to defaults, keeps the same firmware version, and does not affect any Boot-up logo art if applicable. Setting defaults first avoids unexpected behavior due to some changes in upgrades.

9. Congradulations, and Stay Fluxey, my friends!

Troubleshooting

1. If the Pinecil V2 fails to connect to the PC, check the dmesg command output.

   a. try different cable: usb-C to C is recommended over Usb-A, especially if you are having issues.

   b. don't use a USB hub, directly connect to the USB port on the PC or laptop.

   c. try different Usb ports (usb-c recommended). Sometimes the rear ports on a PC are better because they are directly connected to the motherboard.

   d. try a different PC/laptop

2. It is important to hold down the (-) minus button before plugging in the Usb-c cable, and do not release the button for another 15-20 seconds. Try to hold it a little longer before releasing if your computer is slow and it is not working. In rare circumstances on fussy USB ports, keep holding the (-) for the entire update.

3. If all of this fails, then join one of the Live Community Chat channels linked in the Pinecil Wiki as volunteers there might be able to help.

4. Open a an new issue ticket in this Github/Blisp flasher at https://github.com/pine64/blisp/issues

5. See Pinecil Wiki for hardware information.

6. See Github Ralim's IronOS for firmware/software information. This is only the Flasher that loads the firmware; all Pinecil firmware documents and menu instructions are in IronOS.

To Do

• Another code style
• Finalize API
• SDIO and JTAG support