Flipper/GPIO/ReadMe.md

# Starting to document adventures with the GPIO...

Official [GPIO layout](https://miro.com/app/board/uXjVO_LaYYI=/) created by [Aleksandr Kutuzov](https://discord.com/channels/740930220399525928/765282833744265246/993107060172542012).

# Sentry Safe plugin pinout<br>
(Flipper) 8/GND -> Black wire (Safe)<br>
(Flipper) 15/C1 -> Green wire (Safe)

# Mousejack / NRF24 pinout

[More info on RogueMaster's repo](https://github.com/RogueMaster/flipperzero-firmware-wPlugins/tree/unleashed/applications/mousejacker). (Currently the only pre-compiled DFU with this included!)

2/A7 on FZ goes to MOSI/6 on nrf24l01<br>
3/A6 on FZ goes to MISO/7 on nrf24l01<br>
4/A4 on FZ goes to CSN/4 on nrf24l01<br>
5/B3 on FZ goes to SCK/5 on nrf24l01<br>
6/B2 on FZ goes to CE/3 on nrf24l01<br>
8/GND on FZ goes to GND/1 on nrf24l01<br>
9/3V3 on FZ goes to VCC/2 on nrf24l01<br>
IRQ/8 is left disconnected on nrf24l01

![NRF_Pins](https://user-images.githubusercontent.com/57457139/178093717-39effd5c-ebe2-4253-b13c-70517d7902f9.png)

If the nRF model is acting a bit flakey, try adding a capacitor to the vcc/gnd lines! I've not tried the Plus model so it may have a bigger need for a cap. Otherwise, I haven't had any major issues. Anything from a 3.3 uF to 10 uF should do. (Watch your positive/negative placement! Negative to ground.) I learned if you wanna get fancy, include a 0.1 uF cap in parallel. The 3.3 uF to 10 uF will respond to slow freq changes while the 0.1 uF will respond to the high freq switching spikes that the larger one cannot. That said, a single 10 uF will likely suffice for the Mousejack attack. ¯\\\_(ツ)_/¯

![NRF_Capacitor](https://user-images.githubusercontent.com/57457139/178169959-d030f9a6-d2ac-46af-af8b-470ff092c8a7.jpg)
![Cap_parrallel](https://user-images.githubusercontent.com/57457139/178372198-84125694-3b7f-4d31-8343-6f892a5e683c.jpg)

# ESP32 (like devboard but generic)

![ESP32-Pinout](https://user-images.githubusercontent.com/57457139/179119072-2d92b802-9f7e-47ae-bca0-7f56ad51fa21.jpg)

## ESP32 / ESP8266 Pinout to Flipper Zero (thanks [E_Surge](https://github.com/ESurge) for guidance!)

ESP32: 3 (RX0) -> FZ: 13 or 15 (these are TX pins)<br>
ESP32: 1 (TX0) -> FZ: 14 or 16 (these are RX pins)<br>
ESP32: GND -> FZ: 8 or 11 or 18 (GND)<br>
ESP32: 3.3V -> FZ: 9 (3.3V) ***OR*** ESP32: 5V -> FZ: 1 (5V)

Switch between UART Pins 13/14 and 15/16 setting in FlipperZero<br>
`(GPIO -> USB-UART Bridge -> LEFT -> UART Pins)`
Update ReadMe.md 2022-07-14 23:40:33 +00:00			`# Starting to document adventures with the GPIO...`

			`Official [GPIO layout](https://miro.com/app/board/uXjVO_LaYYI=/) created by [Aleksandr Kutuzov](https://discord.com/channels/740930220399525928/765282833744265246/993107060172542012).`
Update ReadMe.md 2022-07-09 05:58:38 +00:00
			`# Sentry Safe plugin pinout<br>`
			`(Flipper) 8/GND -> Black wire (Safe)<br>`
			`(Flipper) 15/C1 -> Green wire (Safe)`

			`# Mousejack / NRF24 pinout`

Update ReadMe.md 2022-07-11 23:04:34 +00:00			`[More info on RogueMaster's repo](https://github.com/RogueMaster/flipperzero-firmware-wPlugins/tree/unleashed/applications/mousejacker). (Currently the only pre-compiled DFU with this included!)`

Update ReadMe.md 2022-07-09 05:58:38 +00:00			`2/A7 on FZ goes to MOSI/6 on nrf24l01<br>`
			`3/A6 on FZ goes to MISO/7 on nrf24l01<br>`
			`4/A4 on FZ goes to CSN/4 on nrf24l01<br>`
			`5/B3 on FZ goes to SCK/5 on nrf24l01<br>`
			`6/B2 on FZ goes to CE/3 on nrf24l01<br>`
			`8/GND on FZ goes to GND/1 on nrf24l01<br>`
			`9/3V3 on FZ goes to VCC/2 on nrf24l01<br>`
Update ReadMe.md 2022-07-11 00:56:49 +00:00			`IRQ/8 is left disconnected on nrf24l01`

Update ReadMe.md 2022-07-11 00:57:41 +00:00			`![NRF_Pins](https://user-images.githubusercontent.com/57457139/178093717-39effd5c-ebe2-4253-b13c-70517d7902f9.png)`

Update ReadMe.md 2022-07-11 23:04:34 +00:00			If the nRF model is acting a bit flakey, try adding a capacitor to the vcc/gnd lines! I've not tried the Plus model so it may have a bigger need for a cap. Otherwise, I haven't had any major issues. Anything from a 3.3 uF to 10 uF should do. (Watch your positive/negative placement! Negative to ground.) I learned if you wanna get fancy, include a 0.1 uF cap in parallel. The 3.3 uF to 10 uF will respond to slow freq changes while the 0.1 uF will respond to the high freq switching spikes that the larger one cannot. That said, a single 10 uF will likely suffice for the Mousejack attack. ¯\\\_(ツ)_/¯
Update ReadMe.md 2022-07-09 05:58:38 +00:00
Update ReadMe.md 2022-07-11 00:57:41 +00:00			`![NRF_Capacitor](https://user-images.githubusercontent.com/57457139/178169959-d030f9a6-d2ac-46af-af8b-470ff092c8a7.jpg)`
Update ReadMe.md 2022-07-11 22:54:27 +00:00			`![Cap_parrallel](https://user-images.githubusercontent.com/57457139/178372198-84125694-3b7f-4d31-8343-6f892a5e683c.jpg)`
Update ReadMe.md 2022-07-14 23:42:52 +00:00
			`# ESP32 (like devboard but generic)`

			`![ESP32-Pinout](https://user-images.githubusercontent.com/57457139/179119072-2d92b802-9f7e-47ae-bca0-7f56ad51fa21.jpg)`
Added ESP32 Pinout 2022-07-17 05:19:32 +00:00
Added ESP8266 (thanks E_Surge!) 2022-07-21 08:39:40 +00:00			`## ESP32 / ESP8266 Pinout to Flipper Zero (thanks [E_Surge](https://github.com/ESurge) for guidance!)`
Added ESP32 Pinout 2022-07-17 05:19:32 +00:00
			`ESP32: 3 (RX0) -> FZ: 13 or 15 (these are TX pins)<br>`
			`ESP32: 1 (TX0) -> FZ: 14 or 16 (these are RX pins)<br>`
			`ESP32: GND -> FZ: 8 or 11 or 18 (GND)<br>`
			`ESP32: 3.3V -> FZ: 9 (3.3V) *OR* ESP32: 5V -> FZ: 1 (5V)`

			`Switch between UART Pins 13/14 and 15/16 setting in FlipperZero<br>`
			`(GPIO -> USB-UART Bridge -> LEFT -> UART Pins)`